RadioLink R6DSM 2.4G 10CH Receiver for RadioLink AT9 AT10 Transmitter

Radiolink R6DSM, 2.4G 10 channels receiver, DSSS and FHSS spread spectrum working synchronously, SBUS and PPM signal support, use for Radiolink transmitters AT9S AT10 AT10II transmitter, is the best choice for racing drone.

Specifications:

• Brand: RadioLink
• Model: R6DSM
• Channel: 10channel
• Working voltage: 4.8-6V
• Working current: 38-45mA (input voltage: 5V)
• Section precision: 4096
• Control distance: about 600 meters
• Two signal working mode:
  Blue/purple LED, SBUS signal, 10 channels totally
  Red LED always, PPM signal, 10 channels totally
• SBUS and PPM signal change: short press the ID SET switch two times within 1 second, the signal is changed from SBUS to PPM. The red LED indicates the PPM and blue/purple indicates SBUS
• Item size: 25 * 15 * 5mm (without cable)
• Item weight: 1.6g

How to bind with transmitter:

1. Place the transmitter and the receiver close to each other within 1 meters
2. Turn on the transmitter, then power on the R6DSM
3. Connect CH3 of R6DSM to ESC
4. There is a black button on the R6DSM, press the binding button twice in two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED always on

Product Homepage